SC Automation Limited
SC Automation Limited
Add to Cart
16-channel, No external power required, HART field device input (revision 5 to 7), Used with HART Multiplexer Master KFD2-HMM-16, Up to SIL 3 acc. to IEC/EN 61508
Technical Data
| Functional safety related parameters | ||
|---|---|---|
| Safety Integrity Level (SIL) | SIL 3 | |
| Supply | ||
| Connection | via 14-channel flat cable form master KFD2-HMM-16 | |
| HART signal channels (non-intrinsically safe) | ||
| Conformity | HART field device input (revision 5 to 7) | |
| Connection | 26-pin flat cable for analog connections | |
| Leakage current | < 3 µA at -20 ... 85 °C (-4 ... 185 °F) | |
| Terminating resistor | external 230 ... 500 Ω standard (up to 1000 Ω possible) | |
| Output voltage | ≥ 400 mV ss (with the terminator resistance specified above) | |
| Output resistance | 100 Ω or smaller, capacitive coupling | |
| Input impedance | according to HART specification | |
| Input voltage range | 0.08 ... 4 V ss ; typ. ± 5.2 V as local reference | |
| Indicators/settings | ||
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility |
| |
|
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity | ||
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 65 °C (-4 ... 149 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Mass | approx. 100 g | |
| Dimensions | 20 x 93 x 115 mm (0.8 x 3.7 x 4.5 inch) (W x H x D) , housing type B1 | |
|
| Height | 93 mm |
|
| Width | 20 mm |
|
| Depth | 115 mm |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in connection with hazardous areas | ||
| Certificate | PF 07 CERT 1143 X | |
|
| Marking |
|
| Directive conformity |
| |
|
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 |
Related Models:
| KCD2-SCD-EX1 | KFU8-UFT |
| KCD2-STC-EX1.20 | K-HM26-2M-261533 |
| KFD2-SR2-Ex1.W.LB | NBB15-U1-E2 |
| KFD2-SR2-2.W.SM | NBB1,5-5GM25-E2 |
| KFD2-SR2-Ex2.W.SM | NBB1,5-5GM25-E2-V3 |
| KFD2-SR2-Ex2.2S | NBB1,5-F79-E0 |
| KFD2-SR2-2.2S | NBB1,5-F79-E2 |
| KFA6-DWB-EX1.D | NBB15-U1-Z2 |
| KFA6-SR2-Ex2.W | NBB5-18GM50-E2-V1 |
| KFA6-SR-2.3L.FA | NBB15-30GM30-E2-V1 |
| KFA6-ER-1.5 | NBB15-30GM50-A2-V1 |
| NBB15-30GM50-E2 | |
| KFA6-ER-1.W.LB | NBB15-30GM50-E2-M |
| KFA6-ER-2.W.LB | NBB15-30GM50-E2-V1 |
| NBB15-30GM50-E2-V1-M | |
| KFA6-SR-2.3L.FA | NBB8-18GM30-E2 |
| KFA6-STR-1.24.4 | NBB8-18GM30-E2-V1 |
| KFD0-CS-Ex1.50P | NBB8-18GM60-A2-V1 |
| KFD2-SH-Ex1.T.OP | NJ4-12GK-SN |
| KFD2-SL2-EX2.B | NJ5-18GK-N |
| KFD2-SR2-EX1.W | NJ5-18GK-N-150 |
| KFD2-SR2-Ex2.W | NJ5-18GM-N |
| KFD2-STC5-1.2O | NJ8-18GK-N |
| KFD2-STC5-Ex1 | RD0-FB-EX4 |
| KFD2-STC5-Ex1.H | RD0-TI-Ex8.FF.* |
| HIC2031 | Z787.F |
