SC Automation Limited
SC Automation Limited
Add to Cart
The 200350 and 200355 Accelerometers are general purpose, case-mounted seismic transducers designed for use with Trendmaster Pro Constant Current Direct Input Card, part number 149811-02 and the Seismic Direct Input Card, part number 164746-01.
The 200350 and 200355 Accelerometers are contained within a hermetically sealed, stainless steel case. The design provides an extremely rugged transducer, well suited for harsh industrial environments. Each transducer’s top mounted, 2-pin connector (MIL-C5015) allows for easy installation and removal of the interconnecting signal cable. A ¼-28 threaded hole on the bottom of the casing accommodates multiple mounting options.
The 200350 and 200355 Accelerometers contain a piezoelectric sensing device, which generates charge when subjected to vibration. This charge is then converted electronically to a differential voltage signal, which is proportional to the acceleration that is parallel to the sensitive axis of the transducer.
200350 – AA - BB - CC
|
A: Mounting Stud |
|
|
00 |
¼-28 SS w/ Brass tip, 0.5” |
|
01 |
¼-28 to M6 x 1.00 Stainless Steel |
|
02 |
¼-28 to M8 x 1.25 Stainless Steel |
|
09 |
No mounting stud |
|
10 |
1/4 -28 Adhesive Stud Mount |
|
11 |
M6x1 Adhesive Stud Mount |
|
12 |
M8x1.25 Adhesive Stud Mount |
|
13 |
Magnetic Base Kit |
|
B: Tolerance |
|
|
00 |
100 mV/g ± 20% (10.2 mV/m/s^2 ±20%) |
|
C: Approvals |
|
|
00 |
No Approvals |
|
01 |
CSA, ATEX, IECEx |
