SC Automation Limited
Add to Cart
Bently Nevada 9200 Seismoprobe Velocity Transducers
Bently Nevada Seismoprobe Velocity Transducer Systems are designed to measure absolute (relative to free space) bearing housing, casing, or structural vibration. The two-wire systems consist of a transducer and appropriate cable. The Seismoprobe family of velocity transducers is a two-wire design that uses moving-coil technology. It provides a voltage output directly proportional to the transducer's vibration velocity. Moving-coil transducers are less sensitive to impact or impulsive excitation than solid-state velocity transducers, which are inherently accelerometers with embedded integration electronics. Moving-coil transducers are less sensitive to impact or impulsive excitation and can represent a good choice for certain applications. Because they don’t require external power, they are convenient for portable measurement applications.
Ordering Information
Two-wire Transducer
9200-AA-BB-CC-DD
A: Transducer Mounting Angle/Minimum Operating Frequency Option | |
01 | 0 ±2.5, 4.5 Hz (270 cpm) |
02 | 45 ±2.5, 4.5 Hz (270 cpm) |
03 | 90 ±2.5, 4.5 Hz (270 cpm) |
06 | 0 ±100, 10 Hz (600 cpm) |
09 | 0 ±180, 15 Hz (900 cpm) |
B: Connector/Cable Option | |
01 | Top Mount (no cable) |
02 | Side Mount (no cable) |
05 | Terminal block top mount (no cable) |
10 through 50 | |
10 | 10 feet (3.0 meter) |
15 | 15 feet (4.6 meter) |
22 | 22 feet (6.7 meter) |
32 | 32 feet (9.8 meter) |
50 | 50 feet (15.2 meter) |
C: Mounting Base Option | |
01 | Circular; 1/4-20 UNC stud |
02 | Circular; 1/4-28 UNF stud |
03 | Rectangular flange |
04 | Circular; with three 8-32 threaded studs on a 44 mm (1.75 in) diameter bolt circle |
05 | No base; 1/2-20 UNF-3A stud |
06 | Isolated circular 1/4-20 UNC stud |
07 | Isolated circular 1/4-28 UNF stud |
08 | Isolated rectangular flange |
09 | Isolated circular 5/8-18 UNF stud |
10 | Circular; M10X1 stud |
11 | Isolated circular M10X1 |
12 | Isolated circular 1/2-20 UNF-2A |
D: Agency Approval Option | |
00 | No Approvals |
01 | CSA |
04 | ATEX/IECEx |
