SC Automation Limited
SC Automation Limited
Add to Cart
Model ALE111 Ethernet Communication Module (for FIO) that a field control station (FCS) uses to perform Ethernet communication with subsystems such as FA-M3. This Ethernet communication
module can be mounted on field control units (AFV30 , AFV40 , AFV10, and AFF50), ESB bus node unit (ANB10), optical ESB bus node unit (ANB11), and ER bus node unit (ANR10).
The Ethernet communication module (ALE111) hardware specifications are as shown below.
Table Ethernet communication module hardware specifications
|
Item |
Specifications |
|
Physical layer interface |
IEEE802.3 10BASE-T |
|
Connection method |
Point-to-point |
|
Connector |
RJ-45 |
|
Transmission method |
Half-duplex |
|
Transmission speed |
10 Mbps |
|
Transmission route |
100 ohm twisted-pair cable (not shielded) |
|
Transmission distance |
1 segment, 100 m (in between FCS and subsystems, or HUB and subsystems) |
|
Installation method |
Mounted on ANB10 , ANB11 , ANR10 , AFF50 , AFV10 , AFV30 , or AFV40 |
|
No. of ports |
One port |
|
Media access control |
CSMA/CD |
|
Communication functions |
Communications with FA-M3, Modbus, MELSEC, YFGW, DARWIN/DAQSTATION, and PLC-5/SLC500 |
|
Current consumption |
0.5 A |
|
Weight |
0.3 kg |
Related Part Number:
| AED5D-00 |
| AIP601 |
| AIP826 |
| AIP827-2 |
| AIP830-101 |
| AIP830-101-EIM-VESA |
| AKB331-M020 |
| ALE111-S50 |
| ALE111-S51 |
| ALR121-S00 |
| AMN33 |
| ATD5A-00 |
| ATK4A-00 |
| AX01C-C010-CH |
| AX01C-C015/CH |
| AXG080-GA000AA1AH112B-2JA11-CH |
| AXG100-GG000BA1AH114B-NNNNNCH |
| AXG150-CGNF2AA2AH214BNNNNN-GRH-CH-L2 |
| AXG4A |
| AXG4A-CNF2121JA11/CH |
| AXG4A-CNF2141JA11-CH-L2 |
| AXG4A-G000141JA12-CH |
| BT200-N00 |
| CP451-10 |
| DO30G |
| E7042UD |
| E7042UD |